config.xxxhdpi

config.en

Everyone

AleksandrStartAndroidApps

Ice Cream Sandwich

Electric motor boat made of foam 

How to make a foam boat

How to make an electric boat, from simple to advanced models. The material to be used for making an electric boat.

Necessary material:
1-the wooden part
2-Motor 
3-switch,
4-the battery, 
5-wire
6-foam
7-plastic bottle

How to make a ship out of Styrofoam, if you've ever thought about creating a homemade boat, you may be interested in the fact that some home-made creations have led to the appearance of new models. The best foam toy boats are made from a single piece. You can try using pre-formed foam packaging. Use polystyrene foam with closed pores. Open-pore foam, which has a honeycomb structure, absorbs water, becomes heavier, and eventually sinks.

Boat with motor, take the hot glue and attach the motor to the axle. Then fix the motor to the boat. Keep in mind that the foam may melt due to hot glue. Attach the battery holder to the boat on both sides of the tape. Cut the steering plates from the tin, make cuts on the back of the boat, and place them there. Connect the wires from the battery holder to the engine, how to make a boat. Also, you can figure out how to make a kayak.

Polyurethane foam is a lightweight, durable and inexpensive material used for insulation in modern buildings, but it has other construction potential, including building models and shapes. Here is an article explaining how to build a ship using this versatile material to make toy boats.
Use a utility knife to cut the rough shape of the boat out of the foam block, then go back to the shape and smooth it out again. You may need to replace the blade in your universal knife once or twice during this cutting process; the sharper it is, the better and easier it will work. Paint with latex paints, and the electric boat will get a new look of its creation.
This app does not work without the Internet!!!


Electric motor boat made of foam

Остання версія Electric motor boat made of foam

Інші версії